Poliflex blocks

Poliflex grinding block 30x60x115 mm bond PUR SIC120 for fine grinding and finishing

Item number:
41020120
EAN:
4007220298688

Login / Register
Choose options
Abrasive
Grit size
Technical information
Poliflex grinding block 30x60x115 mm bond PUR SIC120 for fine grinding and finishing

Abrasive
Silicon carbide SiC/C
Bond
PUR
Grit size
120
Height
30 mm
Length
115 mm
Width
60 mm
Packaging unit
5 pieces
Description

Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications.

The rhomboidal shape even enables work to be effortlessly performed on hard-to-reach places such as corners. With a diamond cut-off wheel, the blocks can be minimized and adapted to the respective application as required.

Poliflex fine grinding tools with the PUR bond are manufactured with green silicon carbide (SiC). The PUR bond is a very soft bond which is available in two hardness grades (PUR-W, PUR-MH). It is homogeneously interspersed with abrasive grain.

The rhomboidal shape even enables work to be effortlessly performed on hard-to-reach places such as corners. With a diamond cut-off wheel, the blocks can be minimized and adapted to the respective application as required.

Advantages
  • Produces very good surface quality.
  • High economic efficiency thanks to long tool life and high stock removal rate.
  • Maximum working convenience through precise concentricity.
  • Highly flexible, enabling optimal adjustment to the contour.
  • Cool and very gentle grinding thanks to open structure and elastic bond.
  • Produces a fine, matt surface finish.
Recommendations for use
  • Depending on the intended use, profile using a dressing diamond or ceramic dressing stone at a low rotational speed.
  • For the best results, use at a recommended cutting speed of 10-15 m/s.
Ordering notes
  • Please complete the description with the desired grit size.
Safety notes
  • For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
  • The clamping length of the shank has to be at least 10 mm.
Materials that can be worked
Aluminium
Brass
Cast steel
Copper
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Stainless steel (INOX)
Steel materials with a hardness > 54 HRC
Steels up to 1,200 N/mm² (< 38 HRC)
Zinc
Applications
Step-by-step fine grinding
Structuring (matt finishing, brush matting and satin finishing)
Drive types
Manual application
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.