Bench grinding wheels CARBIDE

Bench grinding wheel dia. 200x25 mm centre hole dia. 32 mm SiC80 for hard materials e.g. tungsten carbide

Choose options

Dia. external

150 mm 200 mm

Dia. hole

32 mm

Grit size

60 80 120

Width

20 mm 25 mm

Technical information

Bench grinding wheel dia. 200x25 mm centre hole dia. 32 mm SiC80 for hard materials e.g. tungsten carbide

Description

PFERD bench grinding wheels have been adapted to the standard bench grinders on the market.

The CARBIDE type is used on hard materials, such as for sharpening tungsten carbide tools.

Advantages

Recommendations for use

Dressing the disc on a regular basis exposes sharp grain and maintains an even grinding area.
Constantly adjust the workpiece support to the grinding disc diameter (gap width max. 3Â mm).

Safety notes

The maximum permitted peripheral speed is 35 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Before clamping, the grinding tool must be ring tested to make sure that it does not have any cracks (undamaged grinding tools give a clear tone).

Materials that can be worked: Glass; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel materials with a hardness > 54 HRC; Tungsten carbide

Applications: Deburring; Sharpening; Working on edges (chamfering, rounding)

Downloads