• Blog
  • About Us
  • Contact Us
  • My Wishlist 0
PFERD Australia Pty Ltd
1300 073 373

Vertrau Blau

Trust In The Blue

  • Product Range
  • Call
  • GRINDING & CUT-OFF WHEELS
    • CUTTING WHEELS
      • All Cutting Wheels
      • Thin Cutting
      • Stainless Steel - INOX
      • Steel
      • Aluminium
      • Stone
      • Diamond
      • Small Diameter
      • Specialty
      • DUODISC Cut & Grind
    • CUTTING WHEELS LARGE DIAMETER
      • All Large Diameter Cutting
      • Low Speed
      • High Speed
      • Rail Cutting
      • Large Wheel Accessories
    • GRINDING WHEELS
      • All Grinding Wheels
      • CC Grind STRONG
      • CC-Grind Solid
      • Stainless Steel - INOX
      • Steel
      • Aluminium
      • Stone
      • Specialty
      • Ring Wheels
      • Flared Cup Wheels
      • Bench Grinding Wheels
      • ALUMASTER
      • Combiclick Fibre Discs
      • Fibre Discs
    • CC-GRIND SOLID SYSTEM
      • All CC-Grind Solid
      • Discs
      • Clamping Flange Set
    • FLAP DISCS
      • All Flap Discs
      • Stainless Steel - INOX
      • Steel
      • Aluminium
      • Specialty
      • Curve Flap Discs
    • STARTER PACKS - CUT & GRIND
      • All Starter Packs
      • Combiclick Starter Packs
      • CC-Grind Solid Starter Packs
    • COMBICLICK SYSTEM
      • All Combiclick
      • Backing Pads
      • Combiclick Fibre Discs
    • ACCESSORIES
      • Arbors
      • Backing Pads
      • Clamping Flange Sets
      • Large Diameter Wheel Accessories
      • Alumaster
    • FIBRE DISCS
      • Actirox NEW
      • All Fibre Discs
      • Accessories
    Resin Fibre Discs - ACTIROX - Ceramic Range - Maximum Stock Removal

    Resin Fibre Discs - ACTIROX - Ceramic Range - Maximum Stock Removal


  • FINE GRINDING & POLISHING
    • FINE GRINDING RANGE
      • Spiral Bands
      • Abrasive Cartridge Roll
      • Abrasive Caps
      • Flap Wheels - Mounted
      • Flap Wheels - Unmounted
      • Flap Wheels - Angle Grinders
      • Flap Drums
      • CDR Type Grinding
      • Economy Rolls
      • Surface Conditioning Mounted Finishing Wheels
      • Surface Conditioning Ring Wheels
      • Surface Conditioning Ring Wheels Unmounted
      • Surface Conditioning Drums
      • Surface Conditioning Discs
      • Ring Wheels - Unitized Discs
      • Surface Conditioning Cross Buffs
      • Surface Conditioning Velstick Discs
      • Surface Conditioning Combiclick
      • Surface Conditioning Flap Discs
      • Surface Conditioning Hand Pads
      • Surface Conditioning Rolls
      • POLIFLEX Blocks
      • POLIFLEX Mounted Points
    • ECONOMY ROLLS
      • Economy Roll - Coated Abrasive
    • SURFACE CONDITIONING RANGE
      • Mounted Finishing Wheels
      • Ring Wheels
      • Ring Wheels Unmounted Type
      • Drums
      • Discs
      • Cross Buffs
      • Velstick Discs
      • Combiclick
      • Flap Discs
      • Hand Pads
      • Rolls
      • CDR Type
    • CLEANING & STRIPPING RANGE
      • Discs
      • Clean & Stripping Shank Mounted
      • Centre Hole Type
      • CDR Type
    • CD & CDR RANGE
      • CDR Type Discs
      • CD Type Discs
    • POLISHING RANGE
      • Felt Flap Discs
      • Felt Flap Wheels
      • Felt Points
      • CDR Type
      • Ring Wheels Unitized Discs
      • Polishing - Combiclick
      • Polishing - Combiclick Kits
      • Compounds & Bars
    • ACCESSORIES
      • Arbors
      • Drum Holders
      • Holders CDR Type
      • Holders CD Type
      • Cap Holders
      • Velstick Backing Pad
      • Polishing Compounds & Bars
      • Polishing - Metal Cleaners
    COMBIDISC Abrasive Disc Mini Packs - Aluminium Oxide - CDR Type

    COMBIDISC Abrasive Disc Mini Packs - Aluminium Oxide - CDR Type


  • WIRE BRUSHES
    • ALL BRUSHES
      • All Brushes
    • SHAFT MOUNTED BRUSHES
      • All Shaft Mounted Brushes
      • Crimped
      • Plastic Filament
      • Twist Knot
      • Encapsulated
      • Poliscratch
      • Brush Set
    • WHEEL BRUSHES
      • All Wheel Brushes
      • Crimped
      • Twist Knot
      • Pipeliner
      • Poliscratch
      • Adaptors
    • CUP BRUSHES
      • All Cup Brushes
      • Cup Brushes
      • Flared Cup Brushes
    • PENCIL BRUSHES
      • All Pencil Brushes
      • Crimped
      • Twist Knot
      • Encapsulated
      • Accessories
    • HAND SCRATCH & MISCELLANEOUS BRUSHES
      • Scratch & Misc. Brushes
      • Hand Scratch
      • IBU Interior Brushes - Tube Brushes
      • Accessories
    • ACCESSORIES
      • Arbors
      • Adaptors
      • Limiting Rings
      • Extensions
    Pencil Brushes 6mm Shaft Mounted PBU - Crimped INOX Wire - Mini Pack

    Pencil Brushes 6mm Shaft Mounted PBU - Crimped INOX Wire - Mini Pack


  • BURRS, HOLESAWS & DRILL BITS
    • TUNGSTEN CARBIDE BURRS
      • All Burrs
      • 1/4" Shank Burrs
      • 1/4" Extended Shank Burrs
      • 3.0mm Shank Burrs
      • 6.0mm Shank Burrs
      • Specialty Burrs
    • TUNGSTEN CARBIDE BURR SETS
      • 1/4" Shank Burr Sets
      • 3mm Shank Burr Sets
      • 6mm Shank Burr Sets
    • ALUMASTER
      • High Speed Disc - Alumaster
    • HOLE SAWS
      • All Hole Saws
      • Hole Saw Sets
      • Hole Saw Accessories
    • DRILL BITS
      • Drill Bits
      • Drill Sets
    Miniature Burrs WRC 3mm Shank - Cylindrical Radius Cut - Tungsten Carbide

    Miniature Burrs WRC 3mm Shank - Cylindrical Radius Cut - Tungsten Carbide


  • COATED ABRASIVES
    • COATED ABRASIVES
      • All Coated Abrasives
    • ABRASIVE DISCS
      • All Abrasive Discs
      • Aluminium Oxide
      • Zirconia Alumina
      • Ceramic
      • Tekno Discs
      • Delta Type Discs
      • Combiclick
      • Floor Sanding Discs
      • Velcro Backed Discs
      • Accessories
    • ABRASIVE SHEETS
      • Floor Sanding Sheets
      • All Abrasive Sheets
    • ABRASIVE BELTS
      • All Abrasive Belts
      • Aluminium Oxide
      • Zirconia Alumina
      • Ceramic
      • Silicon Carbide
      • Special Materials
      • Floor Sanding
    • PAINTERS ROLLS - SPONGE & SPECIAL ITEMS
      • All Items
      • Painters Rolls
      • Economy Rolls
      • Starter Converter Kits
      • Sponge Products
      • Special Items
    • ACCESSORIES
      • Backing Pads
    Resin Fibre Discs - ACTIROX - Ceramic Range - Maximum Stock Removal

    Resin Fibre Discs - ACTIROX - Ceramic Range - Maximum Stock Removal


  • FILES
    • ENGINEERS FILES
      • Hand Files
      • Flat Files
      • Three Square Files
      • Square Files
      • Half Round Tapered Files
      • Round Files
      • Knife Files
      • File Sets
      • File Accessories
    • SPECIAL FILES
      • Lathe Files
      • Key Warding Files
      • Tungsten Point Files
      • Car Body Files
      • Milled Tooth Files
      • Horse Shoe Files
      • Saw Sharpening Files
      • Slim Taper Saw Files
      • Mill Saw Files
      • Chain Saw Files
      • Needle Files
      • File Sets
      • File Accessories
    • FILES
      • All Files
      • All Accessories
    • FILE SETS
      • All File Sets
    Ultra Slim Taper Saw File - No Handle 1239 125 mm C2

    Ultra Slim Taper Saw File - No Handle 1239 125 mm C2


  • MOUNTED POINTS
    • MOUNTED POINTS
      • All Mounted Points
      • Standard Range
      • Special Application
      • Sets & Assortments
      • Accessories
    • BENCH GRINDING
      • Bench Grinding Wheels
    W Shapes 1/8" Shank AWCO Ceramic - Blue

    W Shapes 1/8" Shank AWCO Ceramic - Blue


  • DIAMOND & CBN
    • DIAMOND TOOLS
      • Handy Files
      • Needle Files
      • File Kits
      • Grinding Points
    • CUTTING WHEELS
      • All Diamond Cutting Wheels
    Diamond Cut-Off Wheels General Purpose - Continuous Type DG-FL

    Diamond Cut-Off Wheels General Purpose - Continuous Type DG-FL


  • GRINDING & CUT-OFF WHEELS
    • CUTTING WHEELS
      • All Cutting Wheels
      • Thin Cutting
      • Stainless Steel - INOX
      • Steel
      • Aluminium
      • Stone
      • Diamond
      • Small Diameter
      • Specialty
      • DUODISC Cut & Grind
    • CUTTING WHEELS LARGE DIAMETER
      • All Large Diameter Cutting
      • Low Speed
      • High Speed
      • Rail Cutting
      • Large Wheel Accessories
    • GRINDING WHEELS
      • All Grinding Wheels
      • CC Grind STRONG
      • CC-Grind Solid
      • Stainless Steel - INOX
      • Steel
      • Aluminium
      • Stone
      • Specialty
      • Ring Wheels
      • Flared Cup Wheels
      • Bench Grinding Wheels
      • ALUMASTER
      • Combiclick Fibre Discs
      • Fibre Discs
    • CC-GRIND SOLID SYSTEM
      • All CC-Grind Solid
      • Discs
      • Clamping Flange Set
    • FLAP DISCS
      • All Flap Discs
      • Stainless Steel - INOX
      • Steel
      • Aluminium
      • Specialty
      • Curve Flap Discs
    • STARTER PACKS - CUT & GRIND
      • All Starter Packs
      • Combiclick Starter Packs
      • CC-Grind Solid Starter Packs
    • COMBICLICK SYSTEM
      • All Combiclick
      • Backing Pads
      • Combiclick Fibre Discs
    • ACCESSORIES
      • Arbors
      • Backing Pads
      • Clamping Flange Sets
      • Large Diameter Wheel Accessories
      • Alumaster
    • FIBRE DISCS
      • Actirox NEW
      • All Fibre Discs
      • Accessories
  • FINE GRINDING & POLISHING
    • FINE GRINDING RANGE
      • Spiral Bands
      • Abrasive Cartridge Roll
      • Abrasive Caps
      • Flap Wheels - Mounted
      • Flap Wheels - Unmounted
      • Flap Wheels - Angle Grinders
      • Flap Drums
      • CDR Type Grinding
      • Economy Rolls
      • Surface Conditioning Mounted Finishing Wheels
      • Surface Conditioning Ring Wheels
      • Surface Conditioning Ring Wheels Unmounted
      • Surface Conditioning Drums
      • Surface Conditioning Discs
      • Ring Wheels - Unitized Discs
      • Surface Conditioning Cross Buffs
      • Surface Conditioning Velstick Discs
      • Surface Conditioning Combiclick
      • Surface Conditioning Flap Discs
      • Surface Conditioning Hand Pads
      • Surface Conditioning Rolls
      • POLIFLEX Blocks
      • POLIFLEX Mounted Points
    • ECONOMY ROLLS
      • Economy Roll - Coated Abrasive
    • SURFACE CONDITIONING RANGE
      • Mounted Finishing Wheels
      • Ring Wheels
      • Ring Wheels Unmounted Type
      • Drums
      • Discs
      • Cross Buffs
      • Velstick Discs
      • Combiclick
      • Flap Discs
      • Hand Pads
      • Rolls
      • CDR Type
    • CLEANING & STRIPPING RANGE
      • Discs
      • Clean & Stripping Shank Mounted
      • Centre Hole Type
      • CDR Type
    • CD & CDR RANGE
      • CDR Type Discs
      • CD Type Discs
    • POLISHING RANGE
      • Felt Flap Discs
      • Felt Flap Wheels
      • Felt Points
      • CDR Type
      • Ring Wheels Unitized Discs
      • Polishing - Combiclick
      • Polishing - Combiclick Kits
      • Compounds & Bars
    • ACCESSORIES
      • Arbors
      • Drum Holders
      • Holders CDR Type
      • Holders CD Type
      • Cap Holders
      • Velstick Backing Pad
      • Polishing Compounds & Bars
      • Polishing - Metal Cleaners
  • WIRE BRUSHES
    • ALL BRUSHES
      • All Brushes
    • SHAFT MOUNTED BRUSHES
      • All Shaft Mounted Brushes
      • Crimped
      • Plastic Filament
      • Twist Knot
      • Encapsulated
      • Poliscratch
      • Brush Set
    • WHEEL BRUSHES
      • All Wheel Brushes
      • Crimped
      • Twist Knot
      • Pipeliner
      • Poliscratch
      • Adaptors
    • CUP BRUSHES
      • All Cup Brushes
      • Cup Brushes
      • Flared Cup Brushes
    • PENCIL BRUSHES
      • All Pencil Brushes
      • Crimped
      • Twist Knot
      • Encapsulated
      • Accessories
    • HAND SCRATCH & MISCELLANEOUS BRUSHES
      • Scratch & Misc. Brushes
      • Hand Scratch
      • IBU Interior Brushes - Tube Brushes
      • Accessories
    • ACCESSORIES
      • Arbors
      • Adaptors
      • Limiting Rings
      • Extensions
  • BURRS, HOLESAWS & DRILL BITS
    • TUNGSTEN CARBIDE BURRS
      • All Burrs
      • 1/4" Shank Burrs
      • 1/4" Extended Shank Burrs
      • 3.0mm Shank Burrs
      • 6.0mm Shank Burrs
      • Specialty Burrs
    • TUNGSTEN CARBIDE BURR SETS
      • 1/4" Shank Burr Sets
      • 3mm Shank Burr Sets
      • 6mm Shank Burr Sets
    • ALUMASTER
      • High Speed Disc - Alumaster
    • HOLE SAWS
      • All Hole Saws
      • Hole Saw Sets
      • Hole Saw Accessories
    • DRILL BITS
      • Drill Bits
      • Drill Sets
  • COATED ABRASIVES
    • COATED ABRASIVES
      • All Coated Abrasives
    • ABRASIVE DISCS
      • All Abrasive Discs
      • Aluminium Oxide
      • Zirconia Alumina
      • Ceramic
      • Tekno Discs
      • Delta Type Discs
      • Combiclick
      • Floor Sanding Discs
      • Velcro Backed Discs
      • Accessories
    • ABRASIVE SHEETS
      • Floor Sanding Sheets
      • All Abrasive Sheets
    • ABRASIVE BELTS
      • All Abrasive Belts
      • Aluminium Oxide
      • Zirconia Alumina
      • Ceramic
      • Silicon Carbide
      • Special Materials
      • Floor Sanding
    • PAINTERS ROLLS - SPONGE & SPECIAL ITEMS
      • All Items
      • Painters Rolls
      • Economy Rolls
      • Starter Converter Kits
      • Sponge Products
      • Special Items
    • ACCESSORIES
      • Backing Pads
  • FILES
    • ENGINEERS FILES
      • Hand Files
      • Flat Files
      • Three Square Files
      • Square Files
      • Half Round Tapered Files
      • Round Files
      • Knife Files
      • File Sets
      • File Accessories
    • SPECIAL FILES
      • Lathe Files
      • Key Warding Files
      • Tungsten Point Files
      • Car Body Files
      • Milled Tooth Files
      • Horse Shoe Files
      • Saw Sharpening Files
      • Slim Taper Saw Files
      • Mill Saw Files
      • Chain Saw Files
      • Needle Files
      • File Sets
      • File Accessories
    • FILES
      • All Files
      • All Accessories
    • FILE SETS
      • All File Sets
  • MOUNTED POINTS
    • MOUNTED POINTS
      • All Mounted Points
      • Standard Range
      • Special Application
      • Sets & Assortments
      • Accessories
    • BENCH GRINDING
      • Bench Grinding Wheels
  • DIAMOND & CBN
    • DIAMOND TOOLS
      • Handy Files
      • Needle Files
      • File Kits
      • Grinding Points
    • CUTTING WHEELS
      • All Diamond Cutting Wheels
  • Abrasives Experts
  • Products you can trust
  • AUSTRALIA WIDE
  • Secure Website
  • Home
  • GRINDING & CUT-OFF WHEELS
  • GRINDING WHEELS
  • All Grinding Wheels
  • CC-GRIND-STRONG 125mm 5" - 3 Layer Grinding Wheel STEEL
CC-GRIND-STRONG 125mm 5" - 3 Layer Grinding Wheel STEEL

CC-GRIND-STRONG 125mm 5" - 3 Layer Grinding Wheel STEEL

  • Facebook
  • Twitter
  • Pinterest
  • Google+

Article Number: 64181125

EAN / Barcode: 4007220104484

$14.05Each
Including GST
$12.77Each
Excluding GST

Enquire Now

Minimum order 10 units

Order in multiples of 10 units

Notify me when back in stock

Your PFERD Key Distributor

  • Facebook
  • Twitter
  • Pinterest

Product Description

CC-GRIND-STRONG - 3 Layer Grinding Wheel STEEL 125mm (5")

Grinding metal has changed with PFERD's innovative NEW grinding wheel the CC GRIND STRONG. A wheel designed for use with a 125mm (5") angle grinders, either powered or cordless. A truly unique high performance grinding wheel. PFERD's CC GRIND STRONG is transforming the way workers grind metal. A wheel that's moved away from the classic grinding disc to a modern high-performance alternative.

 

Up close the CC GRIND STRONG disc looks quite different. You immediately notice the three layers and backing pad are stacked together making for a very unique looking wheel. The disc feels light in your hands and comfortable to handle. Incredibly all three layers are designed for grinding including the backing pad. When grinding this wheel provide consistent performance and a high level of stock removal as you work through each layer. The ceramic grain used in each layer provides a self-sharpening structure for longer-lasting performance and stock removal.

 

One of the first things you notice, when using the CC GRIND STRONG, is the low noise and improved feel you get when grinding metal. A classic style of resin bonded grinding wheels is very noisy in comparison and vibrates much more through the angle grinder. This three-layer disc definitely makes grinding so much more enjoyable. The grinding results are impressive with faster stock removal and a better overall finish. Giving you fewer wheel changes and potentially fewer processes to get the same job done. PFERD has taken grinding to another level with the CC Grind STRONG disc. The perfect wheel for any workshop or tradesperson. Safer to use, less noise, less dust, less vibration and much more stock removal.

 

Quick Benefits - CC GRIND STRONG

- Faster stock/metal removal

- Longer lasting - double the service life versus other leading ceramic grinding wheels

- 3 layers of the ceramic abrasive can be worked through one by one, increasing performance 

- 50% less noise & vibration versus standard grinding wheels

- 70% less dust 

- A superior surface finish compared to standard grinding wheels

 

PFERDVALUE - Abrasives Technical support - If you have any questions about the above product or any abrasives, our sales staff and technical specialists are happy to help. Get a free PFERD on-site abrasives audit and see the latest abrasives in action. Real solutions for working with diverse materials. Call PFERD Australia 1300 073 373 or email online@pferd.com.au

Specifications

Size: 125mm (5")

Max RPM: 12,200

Type: Depressed centre 

Materials that can be worked: steel & scale

Applications: surface grinding, weld dressing, chamferring, deburring

Made In Germany

CC GRIND STRONG Grinding Wheel
PFERDVALUE

About PFERD

See all PFERD products

Product Data

  • Product Data Sheet
  • Product Guide / Sectional

Safety Recommendations

Be The First To Review This Product!

Help other PFERD Australia Pty Ltd users by writing reviews for products purchased.

Write a product review

CC-GRIND SOLID Grinding Discs STEEL - Various Sizes

CC-GRIND SOLID Grinding Discs STEEL - Various Sizes

From $9.97

Each Including GST

View Range

CC-GRIND FLEX Grinding Discs STEEL

CC-GRIND FLEX Grinding Discs STEEL

From $12.01

Each Including GST

View Range

CC-GRIND SOLID & FLEX - Clamping Flange Sets

CC-GRIND SOLID & FLEX - Clamping Flange Sets

From $13.86

Each Including GST

View Range

CC-GRIND 6pc Starter Pack 125mm (5") - includes reusable container

CC-GRIND 6pc Starter Pack 125mm (5") - includes reusable container

$97.55

Each Including GST

More Info

Customer Service

Australia
Call us Monday - Friday, 8.30am to 5pm.

1300 073 373

online@pferd.com.au

Product Support

Need technical advice on the right abrasive products for your application?

Technical Enquiry

Sign up for our email. Get the latest news and product information

Click Here to Subscribe

Join PFERD Australia Online today
Get the latest news & product information

My Account

Cart

Cutting, Grinding, Filing, Milling, Brushing, Polishing, Deburring, Cleaning and Derust with PFERD

Welcome to PFERD online. A site dedicated to abrasives and finishing products. Find the right tools to help you get the job done.

PFERD is recognised for the depth of range, trusted for our quality products and sought after for our expert technical know-how. The brand celebrates over 35 years in Australia with Australia wide service, technical support, product training and much more.

Did you know PFERD means 'Horse' in German? from humble beginnings over 200 years ago the brand and product range now includes over 8,500 products for differing applications, with 95% of the range manufactured by PFERD production plants around the world. In Australia PFERD stocks over 3,800 products including a wide range of files, burrs, fine finishing, polishing, wire to cutting, grinding and more.

No matter your application or industry, be it chemical, steelworks, foundries, pipeline, automotive, construction, aviation and general trade, workers trust in PFERD. 

Equip yourself with PFERD abrasives. For more information or expert technical advice contact our passionate staff on 03 9565 3200.

Product Categories

  • GRINDING & CUT-OFF WHEELS
  • FINE GRINDING & POLISHING
  • WIRE BRUSHES
  • BURRS, HOLESAWS & DRILL BITS
  • COATED ABRASIVES
  • FILES
  • MOUNTED POINTS
  • DIAMOND & CBN

About

  • Contact Us
  • About PFERD Australia
  • PFERD Global
  • Terms & Conditions
  • Privacy & Security Policy
  • Our Guarantee & Returns Policy
  • Your Nearest Key PFERD Distributor

Customer Service

  • PFERDVALUE
  • Health & Safety
  • PFERD Principles
  • PFERD Product Guide
  • PFERD Tool Manual
  • Industry & Applications - PRAXIS
  • Product News & Updates
Copyright © 2022 PFERD Australia Pty Ltd ABN: 97 005 992 629

VERTRAU BLAU

Trust In The Blue